Using wire connectors might sound like something only a professional electrician can do. However, people all around the world crimp an electrical connector at least once in their lives. It’s time to learn how to do it yourself! After all, multi wire connectors are used in all industries, from automotive to marine.
Before making the steps, you need to know where to buy a terminal for your auto, plug, or another application. Some of the best wire connectors are present on WirefyShop – an online store with professional tools made easy. The shop offers a wide variety of pin, ring, tap, and other kinds of terminals.
From regular to heat shrink waterproof, all connectors have their tips and tricks. But here, we go down to the basics where you need a good terminal and some wire crimping tools (you can get them on WirefyShop.com as well).
Table of Contents
How to Crimp a Multi Wire Connector
Using an electrical multi connectors is done in 3 easy steps. If you’re a complete beginner and don’t know which terminal to use or what crimping tool to choose, there’s a #0 step as well.
Step #0: Getting Information
Go online and read about the different kinds of cable connectors. Find out what kind is the best for your application (car, for example). Know your wire gauges and terminal sizes you need. Depending on these, you’ll need a certain crimping tool for the best connection of your wire or multiple wires.
Step #1: Choose/Buy Proper Materials
If you have a kit at home, choose proper connectors and tools according to the type and gauge of the wire you need to crimp. It’s also recommended to choose a representative wire to test the tools and terminals on, making sure the settings are correct.
This is a great tip for beginners who are anxious about the outcome of their small mission.
If you don’t have a crimping tool or the terminals are old and crumbly, it’s better to go to WirefyShop and choose new kits and instruments. Such essential things have to be in every home, just in case.
Step #2: Put the Sleeve On and Crimp
The most important step is actually using the connector. Here’s what you should do:
- Take the needed wire and strip it a little (eventually, the sleeve should cover a bit of the naked wire and a bit of insulation for the best results);
- Apply the connector putting the sleeve on the wire;
- Take your crimping tool and crimp the connection so that the metal parts of both the wire and terminal come together.
Step #3: Check the Connection
Pull the wire a little bit to see if the connection is strong enough. If it moves too much, you will need to crimp again. A perfect application shouldn’t move a lot.
If you’re using heat shrink connectors, apply heat to the sleeve from all sides smoothly to finish the connection.
Easy, isn’t it?
