Ace Master All in a days work.

Ace Master · 18th December 2009, 03:59 PM

Quote:

Originally Posted by Ekka

Another ripper, loved the rope smoking up! You know, did you have that wrapped right with the tail of the rope over the load end not trapped beneath it?

We knew the rope smoking would raise some eyebrows!

Yes, about the wraps it was correct if u watch the video again

you will notice which way the ropes are running and it was tired like a half hitch.

When the rope stopped running, it slightly melted together.

ACE

Eric Frei · 18th December 2009, 05:44 PM

Yeah, with a decent load over the tail it would just stop and lock itself anyway.

What was that rope, tennex?

Ace Master · 18th December 2009, 09:42 PM

Quote:

Originally Posted by Ekka

Yeah, with a decent load over the tail it would just stop and lock itself anyway.

What was that rope, tennex?

just 18mm double braided Polyester and there also was 3 strand in the video too.We buy it by the roll (80m-100m)

ACE

Eric Frei · 19th December 2009, 06:59 AM

Jeez, it flattened it out like ribbon hey.

Buy them and burn them.

Hey Ace, how much you paying for a 100m roll, up here I can get 16mm double braid $312.54 but it's only 5300kg breaking strength.

Ace Master · 23rd December 2009, 07:57 PM

Quote:

Originally Posted by Ekka

Jeez, it flattened it out like ribbon hey.

Buy them and burn them.

Hey Ace, how much you paying for a 100m roll, up here I can get 16mm double braid $312.54 but it's only 5300kg breaking strength.

Ekka,

We buy direct from a the manufacture, I‘ll get back to you with prices, just a little busy now anyway Merry Christmas to all at tree world.

Stay safe and enjoy.

ACE

gawd · 23rd December 2009, 10:27 PM

reply to john dee -ur all welcome to correct me on this -

if u reverse ur cuts -top cut inwards not outwards- have not had a saw rip out of my hand in 12 years-do your cuts right it will not tear -can not do diagrams like Ekka but Im sure he can show u what I mean

Ace Master · 29th April 2010, 07:28 PM

Back with a short video on a Vertical Speed Line job

.

YouTube - Tree Work - Rigging and Vertical Speed Line

Cheers
ACE

Apocalypsse · 29th April 2010, 09:03 PM

Fkn awesome video there. What did you do with the trunk? Firewood or chip it?

Ace Master · 2nd June 2010, 10:52 PM

A small video on our aerials platform, cherry pickers.

Link:

YouTube - Cherry Picker and boom lift trucks

cheers.

ACE

Ace Master · 7th November 2010, 04:19 AM

Our crane video is ready.

YouTube - acetreemaster's Channel

cheers
ACE

Eric Frei · 7th November 2010, 08:44 AM

Another great video, how much did the butt log weigh?

Apocalypsse · 7th November 2010, 09:31 AM

Sweet video. You also may want to take off the first http://www. in the second url as clicking it gets you an error page.

Also just looked on your site and you're getting a 90 metre tower?!/

Ace Master · 7th November 2010, 04:14 PM

Quote:

Originally Posted by Eric Frei

Another great video, how much did the butt log weigh?

Eric

Thanks mate!
That base butt log was 8ton.
Crane was a 80tonner.

Cheers
ACE

Ace Master · 7th November 2010, 04:16 PM

Quote:

Originally Posted by Apocalypsse

Sweet video. You also may want to take off the first The Forum Hosting - Portal Home. in the second url as clicking it gets you an error page.

Also just looked on your site and you're getting a 90 metre tower?!/

Apocalypsse,

thanks, that url all good now, working on that 90m.

cheers
ACE

Apocalypsse · 7th November 2010, 05:47 PM

Never seen a 90m. Seen a video of a 100m but that was a semi trailer. The unit that was all on one truck was like the size of a 15 axle crane. Got pics of what you might be getting?

Eric Frei · 7th November 2010, 08:50 PM

Did you tape a helcam up to the hook? Nice move.

Ace Master · 13th November 2010, 05:24 PM

Quote:

Originally Posted by Apocalypsse

Sweet video. You also may want to take off the first The Forum Hosting - Portal Home. in the second url as clicking it gets you an error page.

Also just looked on your site and you're getting a 90 metre tower?!/

The tower link.

Barin

ACE

TrevMcRev · 13th November 2010, 11:51 PM

Holy Crap!

I reckon you could hire that out at amusement parks.
People would pay money to go up for a scary ride.

willem · 14th November 2010, 06:48 AM

Super video's Ace.

Who are the owners of all those roadside trees. Local goverment?

Eric Frei · 14th November 2010, 11:45 AM

I think they have a mix of local and state govt as some might be forests.

Ace Master · 18th November 2010, 09:16 PM

Quote:

Originally Posted by Eric Frei

I think they have a mix of local and state govt as some might be forests.

That's right a mix bag.

Eric that's the new hookcam.

Cheers.
ACE

Ace Master · 5th March 2011, 03:10 PM

Small video from Helmet Cam.

YouTube - Cutting Down Trees with Head Cam and Husqvarna Chainsaw

Cheers
ACE

Apocalypsse · 7th March 2011, 07:47 AM

Quote:

Originally Posted by Ace Master

Small video from Helmet Cam.

YouTube - Cutting Down Trees with Head Cam and Husqvarna Chainsaw
Cheers
ACE

Pretty sweet video. It doesn't look that tall until you watch how long it takes for the branch to hit the ground. What kind of camera are you using?

Ace Master · 8th March 2011, 06:10 PM

Quote:

Originally Posted by Apocalypsse

Pretty sweet video. It doesn't look that tall until you watch how long it takes for the branch to hit the ground. What kind of camera are you using?

Apocalypsse,

Camera was a Canon HFS20 with fisheye lens, that was taped to my head.
Height of the dead tree was around the 50m mark and ONE of my try hard oppositions knocked this job back

You know what they say "If you talk the talk you have to walk the walk..."

Cheers

ACE

Apocalypsse · 8th March 2011, 11:40 PM

50m dropping dead branches?! Does Mountain Ash shatter into a million pieces from that height, like worse than Desert Ash shatters when its dead dropping mere metres?

Ace Master · 13th May 2011, 12:24 AM

Quote:

Originally Posted by Apocalypsse

50m dropping dead branches?! Does Mountain Ash shatter into a million pieces from that height, like worse than Desert Ash shatters when its dead dropping mere metres?

Apocalypsse,

yep they sure shatter from that height and sometimes they try to replant themselfs.

Cheers
ACE

Ace Master · 12th June 2011, 07:28 PM

G'Day Treeworld,

Another tree video to add to the collection !

Hope you like it

Ace Tree Management - Dangerous Tree Removal!

]YouTube
Cheers ACE

Drouin Tree Service · 12th June 2011, 07:37 PM

What did you do with the wood?

Ill swap you towers

Them mountain ash just go forever can make a long day if not big hitting them,good job.

phill ellison · 12th June 2011, 08:43 PM

Awesome video Ace,

Ace Master · 13th June 2011, 01:50 AM

Quote:

Originally Posted by a_lopa

What did you do with the wood?

Ill swap you towers

Them mountain ash just go forever can make a long day if not big hitting them,good job.

Swap

loaded a tower one just for you Lopa.

YouTube - ‫

ACE

18th December 2009, 05:44 PM	#62
Eric Frei Admin - Razor sharp and independent 2 X Diploma Level 5 qualified arborist Join Date: Jan 2007 Location: Brisbane Posts: 12,820	Re: Ace Master All in a days work. Yeah, with a decent load over the tail it would just stop and lock itself anyway. What was that rope, tennex? __________________ Protect your rights to work - Join Australian Tree Association My businesses:- Qualified Brisbane Tree Lopping \| Stump Grinding Brisbane \| Brisbane - Gold Coast Consulting Arborist

19th December 2009, 06:59 AM	#64
Eric Frei Admin - Razor sharp and independent 2 X Diploma Level 5 qualified arborist Join Date: Jan 2007 Location: Brisbane Posts: 12,820	Re: Ace Master All in a days work. Jeez, it flattened it out like ribbon hey. Buy them and burn them. Hey Ace, how much you paying for a 100m roll, up here I can get 16mm double braid $312.54 but it's only 5300kg breaking strength. __________________ Protect your rights to work - Join Australian Tree Association My businesses:- Qualified Brisbane Tree Lopping \| Stump Grinding Brisbane \| Brisbane - Gold Coast Consulting Arborist

23rd December 2009, 10:27 PM	#66
gawd Former Member Join Date: Nov 2009 Location: perth wa Posts: 26	Re: Ace Master All in a days work. reply to john dee -ur all welcome to correct me on this - if u reverse ur cuts -top cut inwards not outwards- have not had a saw rip out of my hand in 12 years-do your cuts right it will not tear -can not do diagrams like Ekka but Im sure he can show u what I mean

29th April 2010, 09:03 PM	#68
Apocalypsse Veteran Heritage Status Join Date: Feb 2009 Location: Victoria, Australia Posts: 1,154	Re: Ace Master All in a days work. Fkn awesome video there. What did you do with the trunk? Firewood or chip it?

7th November 2010, 04:19 AM	#70
Ace Master Mature tree Join Date: Aug 2007 Location: Australia, Vic, Melbourne Posts: 387	Re: Ace Master All in a days work. Our crane video is ready. YouTube - acetreemaster's Channel cheers ACE __________________ Website: The Mt Dandenong Ranges Tree Specialists YouTube: Ace Tree Master

7th November 2010, 08:44 AM	#71
Eric Frei Admin - Razor sharp and independent 2 X Diploma Level 5 qualified arborist Join Date: Jan 2007 Location: Brisbane Posts: 12,820	Re: Ace Master All in a days work. Another great video, how much did the butt log weigh? __________________ Protect your rights to work - Join Australian Tree Association My businesses:- Qualified Brisbane Tree Lopping \| Stump Grinding Brisbane \| Brisbane - Gold Coast Consulting Arborist

7th November 2010, 09:31 AM	#72
Apocalypsse Veteran Heritage Status Join Date: Feb 2009 Location: Victoria, Australia Posts: 1,154	Re: Ace Master All in a days work. Sweet video. You also may want to take off the first http://www. in the second url as clicking it gets you an error page. Also just looked on your site and you're getting a 90 metre tower?!/

7th November 2010, 05:47 PM	#75
Apocalypsse Veteran Heritage Status Join Date: Feb 2009 Location: Victoria, Australia Posts: 1,154	Re: Ace Master All in a days work. Never seen a 90m. Seen a video of a 100m but that was a semi trailer. The unit that was all on one truck was like the size of a 15 axle crane. Got pics of what you might be getting?

7th November 2010, 08:50 PM	#76
Eric Frei Admin - Razor sharp and independent 2 X Diploma Level 5 qualified arborist Join Date: Jan 2007 Location: Brisbane Posts: 12,820	Re: Ace Master All in a days work. Did you tape a helcam up to the hook? Nice move. __________________ Protect your rights to work - Join Australian Tree Association My businesses:- Qualified Brisbane Tree Lopping \| Stump Grinding Brisbane \| Brisbane - Gold Coast Consulting Arborist

13th November 2010, 11:51 PM	#78
TrevMcRev Mature Tree Join Date: Feb 2007 Location: Melbourne, Victoria, Australia. Posts: 1,605	Re: Ace Master All in a days work. Holy Crap! I reckon you could hire that out at amusement parks. People would pay money to go up for a scary ride.

14th November 2010, 06:48 AM	#79
willem Semi-mature vigorous tree Join Date: Jun 2008 Location: the netherlands Posts: 188	Re: Ace Master All in a days work. Super video's Ace. Who are the owners of all those roadside trees. Local goverment?

14th November 2010, 11:45 AM	#80
Eric Frei Admin - Razor sharp and independent 2 X Diploma Level 5 qualified arborist Join Date: Jan 2007 Location: Brisbane Posts: 12,820	Re: Ace Master All in a days work. I think they have a mix of local and state govt as some might be forests. __________________ Protect your rights to work - Join Australian Tree Association My businesses:- Qualified Brisbane Tree Lopping \| Stump Grinding Brisbane \| Brisbane - Gold Coast Consulting Arborist

8th March 2011, 11:40 PM	#85
Apocalypsse Veteran Heritage Status Join Date: Feb 2009 Location: Victoria, Australia Posts: 1,154	Re: Ace Master All in a days work. 50m dropping dead branches?! Does Mountain Ash shatter into a million pieces from that height, like worse than Desert Ash shatters when its dead dropping mere metres?

12th June 2011, 07:37 PM	#88
Drouin Tree Service Veteran Heritage Status Join Date: Jan 2007 Location: Australia Posts: 1,697	Re: Ace Master All in a days work. What did you do with the wood? Ill swap you towers Them mountain ash just go forever can make a long day if not big hitting them,good job. __________________ Drouin Tree Services \| Excavator Hire - Drouin and SE Gippsland \| Landclearing Melbourne

12th June 2011, 08:43 PM	#89
phill ellison Mature tree Join Date: May 2008 Location: new zealand Posts: 450	Re: Ace Master All in a days work. Awesome video Ace,

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode