Wanting a carburettor from an Echo tophandle

deh · 26th February 2011, 02:54 PM

I am looking for a carburettor from an Echo CS 350 T anyone have a damaged saw that the have the part still on it? Cheers.

deh · 22nd March 2011, 08:22 AM

Still wanting a carburettor - anyone got an Echo top handled saw that has been dropped or damaged beyond use or worn out? I would be pleased to hear from you to discuss a price.

Logger Ally · 22nd March 2011, 08:38 AM

Quote:

Originally Posted by deh

Still wanting a carburettor - anyone got an Echo top handled saw that has been dropped or damaged beyond use or worn out? I would be pleased to hear from you to discuss a price.

What's the model and make on that carb and I'll check

deh · 22nd March 2011, 10:24 AM

I have an Echo CS350 T with a Walbro WT 216 - this carburettor has been superseded, I believe, by a later model

Logger Ally · 22nd March 2011, 10:43 AM

Quote:

Originally Posted by deh

I have an Echo CS350 T with a Walbro WT 216 - this carburettor has been superseded, I believe, by a later model

Good ole WT series..I have those carb kits as anybody can get those and there still in production as a OEM app for those carbs. It will run like a champ with a new kit. Sorry I don't sell those contact the local saw rep and ask him if he's a Walbro dealer..most are!!

deh · 22nd March 2011, 10:49 AM

Thanks for that information - I am actually after a carburettor as a whole unit rather than a kit for it. Cheers

Bruce Hopf · 22nd March 2011, 02:58 PM

Rebuilding a carburetor, is as simple as eating pie. Here is a link, that I posted, about carburetor repair made simple, with a link, to another website, by a guy, that is a service rep, for Stihl, over on the Eastern Sea Board, of the USA. Hope it helps. Bruce. Carburetor repair made simple .

deh · 1st April 2011, 06:57 PM

Thank you - this is a great link.

I am actually after a complete carburetor - the seat of the low adjustment screw has been damaged hence the reason for a complete one.
Cheers

superfire · 2nd April 2011, 07:24 AM

Ok found a possible source for a aftermarket replacement. Check out ebay seller llrdbrn . He has the replacement carb you want. Apperently it also fits the Stihl 028 WB, do not think it is right but could be the same.

deh · 4th April 2011, 03:08 PM

Thanks for that information - I shall follow it up.

26th February 2011, 02:54 PM	#1
deh Sappling Join Date: Jun 2009 Location: Mt Nebo Posts: 7	Wanting a carburettor from an Echo tophandle I am looking for a carburettor from an Echo CS 350 T anyone have a damaged saw that the have the part still on it? Cheers.

22nd March 2011, 08:22 AM	#2
deh Sappling Join Date: Jun 2009 Location: Mt Nebo Posts: 7	Re: Wanting a carburettor from an Echo tophandle Still wanting a carburettor - anyone got an Echo top handled saw that has been dropped or damaged beyond use or worn out? I would be pleased to hear from you to discuss a price.

22nd March 2011, 10:24 AM	#4
deh Sappling Join Date: Jun 2009 Location: Mt Nebo Posts: 7	Re: Wanting a carburettor from an Echo tophandle I have an Echo CS350 T with a Walbro WT 216 - this carburettor has been superseded, I believe, by a later model

22nd March 2011, 10:49 AM	#6
deh Sappling Join Date: Jun 2009 Location: Mt Nebo Posts: 7	Re: Wanting a carburettor from an Echo tophandle Thanks for that information - I am actually after a carburettor as a whole unit rather than a kit for it. Cheers

22nd March 2011, 02:58 PM	#7
Bruce Hopf Veteran Heritage Status Join Date: Dec 2008 Location: North of Sebringville, Ontario, Canada Posts: 1,167	Re: Wanting a carburettor from an Echo tophandle Rebuilding a carburetor, is as simple as eating pie. Here is a link, that I posted, about carburetor repair made simple, with a link, to another website, by a guy, that is a service rep, for Stihl, over on the Eastern Sea Board, of the USA. Hope it helps. Bruce. Carburetor repair made simple . __________________ McCulloch chain saws 1- Pro Mac 60, 1- Pro Mac 700, 2- Mac 10-10 Automatic's, 2- Mini Mac 30's, 2- Mac 110's, 2- Mini Mac 35's, 1- Mac 140 with Automatic Chain Sharpener, 1- Pro Mac 10-10, 1- Mac Cat, 2- Eager Beaver 2.0's, 1- Mac 1-10 Stihl chain saws 2- 044's, 2- 034's, 2- 024's, 1- 064, 1- 084, Strunk chain saws 1- Busy Beaver, 1- SpeeDemon Special Stand Back, I Have A Very Extreme Case of CAD (Chain Saw Addiction Disorder).

1st April 2011, 06:57 PM	#8
deh Sappling Join Date: Jun 2009 Location: Mt Nebo Posts: 7	Re: Wanting a carburettor from an Echo tophandle Thank you - this is a great link. I am actually after a complete carburetor - the seat of the low adjustment screw has been damaged hence the reason for a complete one. Cheers

2nd April 2011, 07:24 AM	#9
superfire Former Member Join Date: Dec 2008 Location: Central Oregon Posts: 166	Re: Wanting a carburettor from an Echo tophandle Ok found a possible source for a aftermarket replacement. Check out ebay seller llrdbrn . He has the replacement carb you want. Apperently it also fits the Stihl 028 WB, do not think it is right but could be the same.

4th April 2011, 03:08 PM	#10
deh Sappling Join Date: Jun 2009 Location: Mt Nebo Posts: 7	Re: Wanting a carburettor from an Echo tophandle Thanks for that information - I shall follow it up.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Echo CS 345	superfire	Chainsaws	13	29th November 2011 08:40 PM
Government wanting to faze out Regular Unleaded Petrol	Brodie	ANNOUNCEMENTS	16	31st October 2011 06:29 AM
Wanting a Husqvarna 346XP	chase	Chainsaws	20	30th November 2010 03:29 AM
Canadian wanting to go work in Australia	scs2011	General Tree Chat	0	1st June 2010 03:45 AM
wanting to do muffler work to my ms361	c2500blue	Chainsaws	9	15th February 2010 02:56 PM