I have a McCulloch mac 1-10 and i have questions.

Johnny

I have a McCulloch mac 1-10 and i can't get it to stay running. It will only start if i directtly put gas in the carborator. Please help me also does McCulloch still make parts for this model saw.

Bruce Hopf

By the sounds of it, you are in need of a carburetor repair kit. As for the parts, there is some availability for them yet, on eBay. I'd start with a carburetor repair kit first. Bruce.

__________________
McCulloch chain saws
1- Pro Mac 60, 1- Pro Mac 700, 2- Mac 10-10 Automatic's, 2- Mini Mac 30's, 2- Mac 110's,
2- Mini Mac 35's, 1- Mac 140 with Automatic Chain Sharpener,
1- Pro Mac 10-10, 1- Mac Cat, 2- Eager Beaver
2.0's, 1- Mac 1-10
Stihl chain saws
2- 044's, 2- 034's, 2- 024's, 1- 064, 1- 084,
Strunk chain saws
1- Busy Beaver, 1- SpeeDemon Special
Stand Back, I Have A Very Extreme Case of CAD (Chain Saw Addiction Disorder).

Johnny

Thank you for the info i just was not sure if it was the carbureter or the problem of suction.

Johnny

Bruce one last question is it possible to buy a new carburetor fr my mcCulloch mac 1-10?

Thanks for all teh help.

Bruce Hopf

You can still get carburetor repair kits for them. Just get the number off of the carburetor, and take it with you, when you go to get one.

__________________
McCulloch chain saws
1- Pro Mac 60, 1- Pro Mac 700, 2- Mac 10-10 Automatic's, 2- Mini Mac 30's, 2- Mac 110's,
2- Mini Mac 35's, 1- Mac 140 with Automatic Chain Sharpener,
1- Pro Mac 10-10, 1- Mac Cat, 2- Eager Beaver
2.0's, 1- Mac 1-10
Stihl chain saws
2- 044's, 2- 034's, 2- 024's, 1- 064, 1- 084,
Strunk chain saws
1- Busy Beaver, 1- SpeeDemon Special
Stand Back, I Have A Very Extreme Case of CAD (Chain Saw Addiction Disorder).

Johnny

I understand that but i was also wanting to know if it is possible to buy a new carbureter for my McCulloch Mac 1-10

Bruce Hopf

You can possibly get a new carburetor, but they can be a bit pricey. Rebuilding a carburetor, isn't to difficult to do, and the cost of the rebuild kit, is under $20.00.
Once you take it apart, to rebuild, just pay attention, to how it comes apart, and put it back together with the new gaskets, and metering diaphragm, along with the new metering needle valve..
I'd be more than happy, to guide you through the rebuilding process, if you need any help with it. Bruce.

__________________
McCulloch chain saws
1- Pro Mac 60, 1- Pro Mac 700, 2- Mac 10-10 Automatic's, 2- Mini Mac 30's, 2- Mac 110's,
2- Mini Mac 35's, 1- Mac 140 with Automatic Chain Sharpener,
1- Pro Mac 10-10, 1- Mac Cat, 2- Eager Beaver
2.0's, 1- Mac 1-10
Stihl chain saws
2- 044's, 2- 034's, 2- 024's, 1- 064, 1- 084,
Strunk chain saws
1- Busy Beaver, 1- SpeeDemon Special
Stand Back, I Have A Very Extreme Case of CAD (Chain Saw Addiction Disorder).

Bruce Hopf

I found this post that I had started a while ago, on rebuilding a carburetor, made easy. This is a very informative and detailed directions, to rebuilding a carburetor. Follow these steps, and you will do OK.
Once you are ready to do the metering needle valve, let me know, and I'll walk you through the process of setting it up, because this carburetor, that is in the following link, is a bit different, then the one on your chain saw, but follow the rest of the directions, and you will do just fine, with the rebuild of the carburetor. Bruce.
Carburetor repair made simple

__________________
McCulloch chain saws
1- Pro Mac 60, 1- Pro Mac 700, 2- Mac 10-10 Automatic's, 2- Mini Mac 30's, 2- Mac 110's,
2- Mini Mac 35's, 1- Mac 140 with Automatic Chain Sharpener,
1- Pro Mac 10-10, 1- Mac Cat, 2- Eager Beaver
2.0's, 1- Mac 1-10
Stihl chain saws
2- 044's, 2- 034's, 2- 024's, 1- 064, 1- 084,
Strunk chain saws
1- Busy Beaver, 1- SpeeDemon Special
Stand Back, I Have A Very Extreme Case of CAD (Chain Saw Addiction Disorder).

Johnny

Thanks for the link but im not very good with motors and i think it might be eaiser for me to take it to a local small motor mechanic.

chainsawland

Are you getting any fuel to the carburetor? I would first make sure the fuel line is not broken off inside the tank.

arborjockey

yeah id take it to a mechanic and ask him if theres a stihl or husky he has sitting around you can buy

sefh3

Replace the fuel lines and filter first. If that doesn't fix it, then buy a carb kit. They are easy and simple to rebuild. Just pay attention to how it comes apart.