372 xp carb settings.

newguy18

Hey does anyone have the carb settings for this saw

__________________
Have your say join us today.


old schooler

Garry Brockley

Max. fast idle speed, rpm Idle speed, rpm
362XP 13500 2700
365 12500 2700
372XP 13500 2700

Before any adjustments are made the air filter should be
clean and the cylinder cover fitted. Adjusting the
carburettor while a dirty air filter is in use will result in a
leaner mixture next time the filter is cleaned. This can give
rise to serious engine damage.
• Carefully turn the L and H-jets clockwise as far as they will
go. Now turn the jets one turn anti-clockwise. The
carburettor is now set to H = 1 and L = 1.

Low speed jet L
Try to find the highest idle speed by turning the low speed jet
L clockwise then anti-clockwise. When the highest speed has
been found, turn the low speed jet L 1/4 turn anti-clockwise.
CAUTION! If the chain rotates while idling the T-screw
must be turned anti-clockwise until the chain stops.
Fine adjustment of the idle speed T
Adjust the idle speed with the T-screw. If it is necessary to readjust,
turn the T-screw clockwise while the engine is running,
until the chain starts to rotate. Then turn anti-clockwise until
the chain stops. When the idle speed is correctly adjusted the
engine should run smoothly in every position and the engine
speed should be safely below the speed at which the chain
starts to rotate.

__________________

newguy18

Thanks galbee.

__________________
Have your say join us today.


old schooler

SawTroll

The limiter caps on the H and L need to be removed before you do that. I guess you know that, but some that may not know it may read the post!

Another thing, there are no rpm specs for "fast idle", so modify your first statement!