Block Driver - if you are blocking down big wood then you need this tool

Ekka · 13th June 2007, 04:49 AM

The Block Driver

You have removed the canopy and working your way down the trunk. It's 3' diameter and you are cutting 12" sections, each weighing around 450lbs. Pushing these off is near impossible...

Until now.

Invented by a treeman, Reg Coates, the Block Driver is inserted under the cut section and simply ratcheted off the trunk. Simple and effective. See for yourself in this video of the Block Driver in action. See how easily a large section is pushed off one handed!

block driver tool

This brilliant tool is available from Australia and New Zealand Arborist Supplies.

Save your back and increase your productivity with the Block Driver.

A copy of the instruction manual can be downloaded here 2mb

nick · 15th June 2007, 12:11 PM

Hi Ekka, I used the BlockDriver this morning on a large poplar trunk that needed felling. Access was very limited. We only had one spot to drop all the blocks and then roll them out through a hole in the hedge.

The stem had quite a lean and, as it happened, it was leaning the wrong way; away from my drop zone.This meant I was under the lean to move the blocks in the desired direction. Usually, I find this part of the job very tiring. With this new device, however, it was an absolute joy to be able to push the blocks (much bigger than I would have normally cut) under control and in an otherwise awkward direction. This smart tool saves a heap of time and work.

http://www.nickbaileytreeservices.co.uk

Ekka · 15th June 2007, 02:00 PM

That's great, can only imagine the PITA it would have been to try get them off other ways.

You'll have to get some pics and maybe vids guys when using this device and stick them in this thread so others can see the savings.

TrevMcRev · 22nd June 2007, 04:39 AM

That looks like a great tool, a little bulky, but i like how its all left on top ready for the next block.

JohN Dee · 24th June 2007, 08:26 PM

The video wouldn't work for me.

Nick, I was just over at your site and was viewing your photo's. They are great photo's, you should start your own thread in the picture forum to show them off to a bigger audience.

Ekka · 24th June 2007, 09:21 PM

Quote:

Originally Posted by JohN Dee

The video wouldn't work for me.

This is the direct URL for it, give it a try.

http://www.mydeo.com/asx.asp?CID=903...2348&WMCache=0

JohN Dee · 24th June 2007, 09:46 PM

Quote:

This video is unavailable. The owner may have removed it or it may have expired.

That's what it comes up like.

nick · 6th July 2007, 11:51 AM

Thanks JohN Dee.
Nearly all those pictures were taken by Paddy, who I work with, on a mobile phone. Customers who have seen the website seem to like the fact that it gives them an idea of what can be done for their trees. Explaining it in words just doesn`t cut the mustard.

Tim Craig · 11th July 2007, 12:20 AM

I've seen the Blockdriver in that guy's videos, looks like a great tool!

A sensible idea for an ugly problem, I'm always struggling to push big sections off the spar, that tool makes it look so easy.

Ekka · 10th January 2008, 02:02 AM

Aussie tree workers heads up.

Block driver and felling bar has been sent out to me by Reg.

This is the deal.

It's no doubt a valuable tool, and many might want to try before they buy.

So, what will happen is this. It can do the rounds, if you need it ... post about it here, if you want to try it ... post about it here.

And of course if you want to buy one just say the magic word here and the right people will hook up.

Anyway, I'm going to send it, complete with the DVD and Instruction Manual it comes with down to Melbourne to AceMaster.

We have to keep a running tab on it and write your reviews here.

Conditions of usage/mailing on as follows.

Dont be a slack ass, send it on if some-one wants it ... after all that's how YOU got it. Make sure you get all the persons details so if it goes missing or gets lost we can track it and get up the fool who lost it. Heck, they should even pay Reg for the loss of it afterall he did this at NO COST to any of us.

So, it'll be going to Ace Master down in Melbourne. I haven't used it yet but dont want to sit on it and want YOU people out there to help make Reg rich coz he's a smart good bloke and no-ones thought of this nor made it.

I can tell you it's very well made, beautifully finished and honestly I'm disappointed not to give it a go but I'm inundated with shit sticks to cut!

Alrighty then, be fair, be honest and keep a track on where it is. I'll get it away in the next few days, have Ace's details etc. He will use it and write about it ... maybe even buy it and we get Reg to send another. The only reason this wont work is because some-one let their end of the bargain down.

Use it and move it if some-one wants it, easy.

a_lopa · 10th January 2008, 02:08 AM

Send it my way after Ace Master

Therrin · 10th January 2008, 02:42 AM

Maybe if he's interested in advertising it in two different countries, and has another to spare, he could send one to the USA mates to do the same with?

Just an idea, I'm not asking for it cuz I don't need it at the moment, but if someone's got big stuff goin on out here, you could get twice as much input, as well as a good sales opportunity.

allmarktree · 13th January 2008, 10:44 AM

What is the cost to purchaase it? How much does it weigh? Maybe its not too expensive to ship it here.

RC1 · 14th January 2008, 09:30 AM

Quote:

Originally Posted by Therrin

Maybe if he's interested in advertising it in two different countries, and has another to spare, he could send one to the USA mates to do the same with?

Just an idea, I'm not asking for it cuz I don't need it at the moment, but if someone's got big stuff goin on out here, you could get twice as much input, as well as a good sales opportunity.

There's one out there already... but that situation apears to have turned into a farce. It has cost me a considerable amount of money, time and also a spot in a trade magazine over here, so embarrassment on top of that also.

Misplaced trust on my part it appears, so ultimately my fault!

There is still one guy out of the group that I hope might yet get his hands on it, and perhaps salvage the situation, but I?ve not heard from him in a while so its not looking good.

Problem is Therrin, I'm running a little low on stock now so I can?t really afford to send any more out at the risk of missing a sale, but if that AWOL sample does resurface then I'll do my best to aim it in your direction. Mark, it cost me about ₤60 to send over, combined weight with bar and package is just under 10kg

Eric, thanks for your effort, input, encouragement and sincerity thus far man

Therrin · 14th January 2008, 06:25 PM

Gotcha...

If you send it in my direction, I'll promise safe-keeping, till you can find someone else who needs it out here. I haven't as-of-yet had the opportunity to block down stuff that I'd need one for. But if you get the mess sorted out I'd hold onto it for ya. Maybe find someone who could try it.

13th June 2007, 04:49 AM	#1 (permalink)
Ekka Admin - Dip Arb & Hort Join Date: Jan 2007 Location: Brisbane Posts: 7,527	Block Driver - if you are blocking down big wood then you need this tool The Block Driver You have removed the canopy and working your way down the trunk. It's 3' diameter and you are cutting 12" sections, each weighing around 450lbs. Pushing these off is near impossible... Until now. Invented by a treeman, Reg Coates, the Block Driver is inserted under the cut section and simply ratcheted off the trunk. Simple and effective. See for yourself in this video of the Block Driver in action. See how easily a large section is pushed off one handed! This brilliant tool is available from Australia and New Zealand Arborist Supplies. Save your back and increase your productivity with the Block Driver. A copy of the instruction manual can be downloaded here 2mb __________________ Remember to use the "search" function, if you have answers/questions post them so everyone can benefit. Free Tree and Green Industry Link Directory Qualified Brisbane Tree Lopping \| Stump Grinding and Stump Removal Brisbane Brisbane Tree Care, Consultations, Developer, Tree and Arborist Reports Forum Sponsors

15th June 2007, 12:11 PM	#2 (permalink)
nick Sappling Join Date: Jun 2007 Location: Manchester uk Posts: 11	BlockDriver Hi Ekka, I used the BlockDriver this morning on a large poplar trunk that needed felling. Access was very limited. We only had one spot to drop all the blocks and then roll them out through a hole in the hedge. The stem had quite a lean and, as it happened, it was leaning the wrong way; away from my drop zone.This meant I was under the lean to move the blocks in the desired direction. Usually, I find this part of the job very tiring. With this new device, however, it was an absolute joy to be able to push the blocks (much bigger than I would have normally cut) under control and in an otherwise awkward direction. This smart tool saves a heap of time and work. http://www.nickbaileytreeservices.co.uk

15th June 2007, 02:00 PM	#3 (permalink)
Ekka Admin - Dip Arb & Hort Join Date: Jan 2007 Location: Brisbane Posts: 7,527	That's great, can only imagine the PITA it would have been to try get them off other ways. You'll have to get some pics and maybe vids guys when using this device and stick them in this thread so others can see the savings. __________________ Remember to use the "search" function, if you have answers/questions post them so everyone can benefit. Free Tree and Green Industry Link Directory Qualified Brisbane Tree Lopping \| Stump Grinding and Stump Removal Brisbane Brisbane Tree Care, Consultations, Developer, Tree and Arborist Reports Forum Sponsors

22nd June 2007, 04:39 AM	#4 (permalink)
TrevMcRev Over mature heritage tree Join Date: Feb 2007 Location: Melbourne, Victoria, Australia. Posts: 760	That looks like a great tool, a little bulky, but i like how its all left on top ready for the next block. __________________ Melbourne Arborist, Total Tree Care, Pruning, Tree and Stump Removal

24th June 2007, 08:26 PM	#5 (permalink)
JohN Dee Over mature heritage tree Join Date: Feb 2007 Location: Sydney, Australia Posts: 824	The video wouldn't work for me. Nick, I was just over at your site and was viewing your photo's. They are great photo's, you should start your own thread in the picture forum to show them off to a bigger audience. __________________ Don't tell me the sky is the limit, when there are footprints on the moon. Free Tree and Green Industry Link Directory Red : Green : Blue

6th July 2007, 11:51 AM	#8 (permalink)
nick Sappling Join Date: Jun 2007 Location: Manchester uk Posts: 11	Thanks JohN Dee. Nearly all those pictures were taken by Paddy, who I work with, on a mobile phone. Customers who have seen the website seem to like the fact that it gives them an idea of what can be done for their trees. Explaining it in words just doesn`t cut the mustard. __________________ Tree Surgeon Manchester

11th July 2007, 12:20 AM	#9 (permalink)
Tim Craig Semi-mature vigorous tree Join Date: Feb 2007 Location: Glasgow, Scotland Posts: 94	I've seen the Blockdriver in that guy's videos, looks like a great tool! A sensible idea for an ugly problem, I'm always struggling to push big sections off the spar, that tool makes it look so easy.

10th January 2008, 02:02 AM	#10 (permalink)
Ekka Admin - Dip Arb & Hort Join Date: Jan 2007 Location: Brisbane Posts: 7,527	Aussie Arborists Heads UP Aussie tree workers heads up. Block driver and felling bar has been sent out to me by Reg. This is the deal. It's no doubt a valuable tool, and many might want to try before they buy. So, what will happen is this. It can do the rounds, if you need it ... post about it here, if you want to try it ... post about it here. And of course if you want to buy one just say the magic word here and the right people will hook up. Anyway, I'm going to send it, complete with the DVD and Instruction Manual it comes with down to Melbourne to AceMaster. We have to keep a running tab on it and write your reviews here. Conditions of usage/mailing on as follows. Dont be a slack ass, send it on if some-one wants it ... after all that's how YOU got it. Make sure you get all the persons details so if it goes missing or gets lost we can track it and get up the fool who lost it. Heck, they should even pay Reg for the loss of it afterall he did this at NO COST to any of us. So, it'll be going to Ace Master down in Melbourne. I haven't used it yet but dont want to sit on it and want YOU people out there to help make Reg rich coz he's a smart good bloke and no-ones thought of this nor made it. I can tell you it's very well made, beautifully finished and honestly I'm disappointed not to give it a go but I'm inundated with shit sticks to cut! Alrighty then, be fair, be honest and keep a track on where it is. I'll get it away in the next few days, have Ace's details etc. He will use it and write about it ... maybe even buy it and we get Reg to send another. The only reason this wont work is because some-one let their end of the bargain down. Use it and move it if some-one wants it, easy. __________________ Remember to use the "search" function, if you have answers/questions post them so everyone can benefit. Free Tree and Green Industry Link Directory Qualified Brisbane Tree Lopping \| Stump Grinding and Stump Removal Brisbane Brisbane Tree Care, Consultations, Developer, Tree and Arborist Reports Forum Sponsors

10th January 2008, 02:08 AM	#11 (permalink)
a_lopa Over mature heritage tree Join Date: Jan 2007 Location: Drouin Posts: 910	Re: Block Driver - if you are blocking down big wood then you need this tool Send it my way after Ace Master __________________ Free Tree Industry Link Directory

10th January 2008, 02:42 AM	#12 (permalink)
Therrin The Tree World Bandit Join Date: Oct 2007 Location: Lancaster, Ca Posts: 1,304	Re: Block Driver - if you are blocking down big wood then you need this tool Maybe if he's interested in advertising it in two different countries, and has another to spare, he could send one to the USA mates to do the same with? Just an idea, I'm not asking for it cuz I don't need it at the moment, but if someone's got big stuff goin on out here, you could get twice as much input, as well as a good sales opportunity. __________________ Ken Fessia I.T.S.A. Tree Service (661) 916-4703

13th January 2008, 10:44 AM	#13 (permalink)
allmarktree Semi-mature vigorous tree Join Date: Jan 2007 Location: Albany, New York Posts: 130	Re: Block Driver - if you are blocking down big wood then you need this tool What is the cost to purchaase it? How much does it weigh? Maybe its not too expensive to ship it here.

14th January 2008, 06:25 PM	#15 (permalink)
Therrin The Tree World Bandit Join Date: Oct 2007 Location: Lancaster, Ca Posts: 1,304	Re: Block Driver - if you are blocking down big wood then you need this tool Gotcha... If you send it in my direction, I'll promise safe-keeping, till you can find someone else who needs it out here. I haven't as-of-yet had the opportunity to block down stuff that I'd need one for. But if you get the mess sorted out I'd hold onto it for ya. Maybe find someone who could try it. __________________ Ken Fessia I.T.S.A. Tree Service (661) 916-4703