Hi Ekka, I used the BlockDriver this morning on a large poplar trunk that needed felling. Access was very limited. We only had one spot to drop all the blocks and then roll them out through a hole in the hedge.
The stem had quite a lean and, as it happened, it was leaning the wrong way; away from my drop zone.This meant I was under the lean to move the blocks in the desired direction. Usually, I find this part of the job very tiring. With this new device, however, it was an absolute joy to be able to push the blocks (much bigger than I would have normally cut) under control and in an otherwise awkward direction. This smart tool saves a heap of time and work.
http://www.nickbaileytreeservices.co.uk