Originally Posted by kimtree

Get a multi tip wheel system for starters.I changed the upper and cutter wheel pulley on mine to taperlock 3 belts instead of 2 belts because no matter how i run it i couldnt get the belts to stop slipping and constantly having to tighten them on that machine is a pia.Now it runs much better.I've got to say that the standard cutter wheel is crap compared to a multitip.What really prompted me to change cutting heads was that 2 pocket bolts sheared off[separate occaisions] and threw the whole thing out of whack,it seems that laski uses a 1/2 bolt instead of 5/8 and different pocket hole centres than superteeth so you have to buy theres instead
Pulley sizes 170-3-2517x if you change to these pulleys you have to change the guard
200-3-2517x
Also if you weld a 90degree bend on to the exhaust it stops the belt cover from getting too hot[Ekkas idea}hope this helps