Tree World - View Single Post

Quintrex · 14th March 2008, 12:29 AM

Remove the retaining nut fron the crank, hold the flywheel with left hand, pulling slightly, then give the side of the flywheel a sharp tap on the side with a brass drift. It will usually pop off first time.
Pullers can cause more damage sometimes.

14th March 2008, 12:29 AM	#3 (permalink)
Quintrex Mature tree Join Date: Jun 2007 Location: Sydney Posts: 437	Re: how to changed a flywheel from a ms440? Remove the retaining nut fron the crank, hold the flywheel with left hand, pulling slightly, then give the side of the flywheel a sharp tap on the side with a brass drift. It will usually pop off first time. Pullers can cause more damage sometimes. __________________ Heightmaster